M·VERA® A5001
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Our allrounder for the field
M·VERA® A5001 is an environmentally friendly plastic compound and has been specially developed for mulch film applications. Thanks to its food contact conformity it can also be used safely in agricultural areas for food production. The material also impresses with its stability and environmental friendliness. It is certified according to OK compost INDUSTRIAL but field tests have shown that M·VERA® A5001 also degrades completely in the field.
The material shows a good tensile strength and a medium tear resistance which makes it resistant to a wide range of weather conditions. M·VERA® A5001 is opaque and is easy to use with the specially developed AF-Eco® black masterbatch.
Problem-free processing on conventional blown film lines allows easy integration into existing production processes. Thanks to its versatile properties, M·VERA® A5001 is a sustainable and high-performance solution for modern agricultural applications.
Product properties
Degradability
OK compost INDUSTRIAL
Density
1.40 g/cm³
Processing technology
Blown film extrusion
MVR (190 °C/2.16 kg)
2-5 cm³/10 min
Tensile modulus (MD/TD)
380/170 MPa
Tensile strength (MD/TD)
25/30 MPa
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·VERA® A5001 (B0090)
English | M·VERA® A5001 | Unit | Standard |
---|---|---|---|
Food contact approval: | yes | - | EU 10/2011 |
Certification: | OK compost INDUSTRIAL | - | EN 13432, certified by TÜV AUSTRIA Belgium |
Appearance: | opaque | - | - |
MVR (190 ˚C/2.16 kg): | 2-5 | cm³/10 min | ISO 1133 |
Density: | 1.4 | g/cm³ | ISO 1183 |
Tensile modulus (MD): | 380 | MPa | ISO 527-3 |
Tensile modulus (TD): | 170 | MPa | ISO 527-3 |
Tensile strength (MD): | 25 | MPa | ISO 527-3 |
Tensile strength (TD): | 30 | MPa | ISO 527-3 |
Elongation at break (MD): | 410 | MPa | ISO 527-3 |
Elongation at break (TD): | 470 | MPa | ISO 527-3 |
Tear strength (MD): | 100 | N/mm | ISO 6383 |
Tear strength (TD): | 50 | N/mm | ISO 6383 |
Please refer to the product data sheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our materials suitable for blown film extrusion here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-CirCarbon® and AF-CirCompex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?