M·VERA® GP1045
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Home compostable and almost 100 % renewable content
M·VERA® GP1045 impresses with its environmentally friendly properties. It is certified according to OK compost HOME and OK biodegradable SOIL which means that it is home compostable and biodegradable in the soil. It also fulfils the requirements for contact with food.
With a content of 98 % renewable raw materials M·VERA® GP1045 offers a sustainable solution for a wide range of applications. Due to the high proportion of renewable raw materials in the polymer, M·VERA® GP1045 is able to minimise the CO2-Footprint of products compared to fossil-based materials.
With a low density and a heat deflection temperature of over 95 °C, the compound offers a wide range of applications. It is characterised by a beige-coloured, translucent appearance and can be moulded excellently on injection moulding machines.
M·VERA® GP1045 is ideal for applications such as coffee capsules, products with film hinges and moulded parts for the agricultural sector. This combination of environmental friendliness and practical properties makes it an excellent choice for modern, sustainable products.
Product properties
Degradability
OK biodegradable SOIL & OK compost HOME
Renewable content
over 98 %
Processing technology
Injection moulding
MVR (160 °C/5 kg)
9 cm³/10 min
Tensile modulus
1,500 MPa
Charpy notched
2 kJ/m²
Image dimensions not found
Change image or reupload it
We will be happy to make you an offer!
Indicative technical data M·VERA® GP1045 (B0217)
English | M·VERA® GP1045 | Unit | Standard |
|---|---|---|---|
Food contact approval: | yes | EU 10/2011 | |
Certification: | OK compost HOME | - | NF T51-800 [11-2015], certified by TÜV AUSTRIA Belgium |
Certification: | OK biodegradable SOIL | - | ISO 17556/EN 13432, certified by TÜV AUSTRIA Belgium |
MVR (160 ˚C/5 kg): | 9 | cm³/10 min | ISO 1133 |
Density: | 1.2 | g/cm³ | ISO 1183 |
Renewable content in the polymer: | > 98 | % | - |
Tensile modulus: | 1,500 | MPa | ISO 527-1/-2 |
Tensile stength: | 26 | MPa | ISO 527-1/-2 |
Yield strength: | 26 | MPa | ISO 527-1/-2 |
Elongation at yield: | 3 | % | ISO 527-1/-2 |
Elongation at break: | 5.5 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 2 | kJ/m² | ISO 179-1/1eA |
Charpy unnotched impact strength (+23 °C): | 14 | kJ/m² | ISO 179-1/1eU |
Heat distortion temperature, HDT/B: | 98 | °C | ISO 75/B |
Please refer to the product datasheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our injection moulding materials here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Plant clips
Coffee capsules
Clips
Packaging
Cutlery
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
