M·VERA® GP1015
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Our universal allrounder
M·VERA® GP1015 is a flexible plastic compound that is characterised by its outstanding properties for a wide range of applications. It is certified according to OK compost INDUSTRIAL. It also fulfils the regulations for contact with food.
A special feature of M·VERA® GP1015 is its high proportion of renewable raw materials in the polymer, which is over 68 %. This emphasises its ecological sustainability and can reduce CO2-footprint of products compared to fossilbased materials.
The light grey appearance of M·VERA® GP1015 gives products an appealing and modern look. With high rigidity and a heat deflection temperature (HDT/B) of up to 115 °C (depending on processing and post-treatment), the compound is suitable for many applications. Thanks to its good processability in injection moulding M·VERA® GP1015 is particularly suitable for coffee capsules, cutlery and a variety of other products.
Product properties
Degradability
OK compost INDUSTRIAL
Renewable content
over 68 %
Processing technology
Injection moulding
MVR (190 °C/2.16 kg)
10 cm³/10 min
Tensile modulus
4,100 MPa
Charpy notched
3.5 kJ/m²
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·VERA® GP1015 (B0071)
English | M·VERA® GP1015 | Unit | Standard |
|---|---|---|---|
Food contact approval: | yes | EU 10/2011 | |
Certification: | OK compost INDUSTRIAL | - | EN 13432, certified by TÜV AUSTRIA Belgium |
MVR (190 ˚C/2.16 kg): | 10 | cm³/10 min | ISO 1133 |
Density: | 1.44 | g/cm³ | ISO 1183 |
Renewable content in the polymer: | > 68 | % | - |
Tensile modulus: | 4,100 | MPa | ISO 527-1/-2 |
Tensile stength: | 40 | MPa | ISO 527-1/-2 |
Yield strength: | 41 | MPa | ISO 527-1/-2 |
Elongation at yield: | 2 | % | ISO 527-1/-2 |
Elongation at break: | 4.7 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 3.5 | kJ/m² | ISO 179-1/1eA |
Charpy unnotched impact strength (+23 °C): | 50 | kJ/m² | ISO 179-1/1eU |
Heat distortion temperature, HDT/B: | 50 - 115 | °C | ISO 75/B |
Please refer to the product datasheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our injection moulding materials here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Coffee capsules
Cutlery
Plant clips
Clips
Packaging
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
