PP for thin and transparent applications
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
PP for thin and transparent applications
M·BIOBASE® PPH 500 nat CI is a plastic compound which is ISCC PLUS certified and suitable for food contact. It is characterised by an allocation factor (biomass-balanced proportion) of 100 % and offers both transparency as well as excellent rigidity which makes it a choice for demanding applications.
The very high flowability of the material enables precise processing and even distribution during injection moulding. It is ideal for a wide range of applications, including packaging, tableware and particularly thin wall components. The good processability on conventional machines ensures efficient manufacturing processes. M·BIOBASE® PPH 500 nat CI combines high performance with environmental awareness and is a forward-looking choice for diverse plastic applications.
Product properties
Certification
ISCC PLUS
Allocation factor
100 %
Processing technology
Injection moulding
MFR (230 °C/2.16 kg)
50 g/10 min
Stiffness
1,650 MPa
Charpy notched
2 kJ/m²
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·BIOBASE® PPH 500 nat CI
English | M·BIOBASE® PPH 500 nat CI | Unit | Standard |
|---|---|---|---|
Food contact approval: | yes | - | EU 10/2011 |
Certification: | ISCC PLUS | - | - |
Biomass-balanced content (allocation factor) | 100 | % | - |
Appearance: | transparent | - | - |
MFR (230 ˚C/2.16 kg): | 12 | g/10 min | ISO 1133 |
Density: | 0.905 | g/cm³ | ISO 1183 |
Tensile modulus: | 1,650 | MPa | ISO 527-1/-2 |
Tensile stength at yield: | 35 | MPa | ISO 527-1/-2 |
Elongation at yield: | 9 | % | ISO 527-1/-2 |
Elongation at break: | 47 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 2 | kJ/m² | ISO 179-1/1eA |
Please refer to the product data sheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our materials suitable for injection moulding here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Packaging
Consumer goods
Toys
Tableware
Plant clips
Packaging
Clips
Coffee capsules
Cutlery
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
