Our sustainable PP allrounder
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Our sustainable allrounder
M·BIOBASE® PPH 120 nat CI is an ISCC PLUS certified plastic material with an allocation factor (biomass-balanced proportion) of 100 %. It is approved for contact with food. The material is characterised by good rigidity and a very high toughness which makes it resistant and versatile.
Thanks to its good flowability M·BIOBASE® PPH 120 nat CI is excellent for processing on conventional machines. It is suitable for the production of packaging and thin-walled components in the injection moulding process. These properties make it an attractive choice for sustainable plastic applications in various industrial sectors.
Product properties
Certification
ISCC PLUS
Allocation factor
100 %
Processing technology
Injection moulding
MFR (230 °C/2.16 kg)
12 g/10 min
Stiffness
1,550 MPa
Charpy notched
3.5 kJ/m²
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·BIOBASE® PPH 120 nat CI
English | M·BIOBASE® PPH 120 nat CI | Unit | Standard |
|---|---|---|---|
Food contact approval: | yes | - | EU 10/2011 |
Certification: | ISCC PLUS | - | - |
Biomass-balanced content (allocation factor) | 100 | % | - |
Appearance: | translucent | - | - |
MFR (230 ˚C/2.16 kg): | 12 | g/10 min | ISO 1133 |
Density: | 0.905 | g/cm³ | ISO 1183 |
Tensile modulus: | 1,550 | MPa | ISO 527-1/-2 |
Tensile stength at yield: | 34 | MPa | ISO 527-1/-2 |
Elongation at yield: | 9 | % | ISO 527-1/-2 |
Elongation at break: | 330 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 3.5 | kJ/m² | ISO 179-1/1eA |
Please refer to the product data sheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our materials suitable for injection moulding here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Toys
Consumer goods
Tableware
Plant clips
Packaging
Clips
Coffee capsules
Cutlery
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
