Impact-resistant PP at low temperatures
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Impact resistant even at low temperatures
M·BIOBASE® PPC 035 nat CI is an ISCC PLUS certified plastic compound and has an allocation factor (biomass-balanced proportion) of 90 %. The material fulfils the requirements for direct contact with food and offers a good rigidity and an excellent cold impact strength which makes it particularly robust. Thanks to these properties, it is ideal for technical components and thick-walled components.
M·BIOBASE® PPC 035 nat CI can be easily processed on conventional machines and is optimised for injection moulding. The replacement of fossil oil (biomass-balanced) and good material performance make it a versatile solution in modern plastics processing.
Product properties
Certification
ISCC PLUS
Allocation factor
90 %
Processing technology
Injection moulding
MFR (230 °C/2.16 kg)
3.5 g/10 min
Stiffness
1,350 MPa
Charpy notched
15 kJ/m²
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·BIOBASE® PPC 035 nat CI
English | M·BIOBASE® PPC 035 nat CI | Unit | Standard |
|---|---|---|---|
Food contact approval: | yes | - | EU 10/2011 |
Certification: | ISCC PLUS | - | - |
Biomass-balanced content (allocation factor) | 90 | % | - |
Appearance: | translucent | - | - |
MFR (230 ˚C/2.16 kg): | 3.5 | g/10 min | ISO 1133 |
Density: | 0.905 | g/cm³ | ISO 1183 |
Tensile modulus: | 1,350 | MPa | ISO 527-1/-2 |
Tensile stength at yield: | 25 | MPa | ISO 527-1/-2 |
Elongation at yield: | 6 | % | ISO 527-1/-2 |
Elongation at break: | 110 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 15 | kJ/m² | ISO 179-1/1eA |
Charpy notched impact strength (-20 °C): | 6.5 | kJ/m² | ISO 179-1/1eA |
Please refer to the product data sheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our materials suitable for injection moulding here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Toys
Technical components
Consumer goods
Tableware
Plant clips
Packaging
Clips
Coffee capsules
Cutlery
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
