Over 95 % biobased PLA with wood fibres
All information about our compound at a glance
Image dimensions not found
Change image or reupload it
Over 95 % biobased PLA with wood look
M·BIOBASE® PLA 035 WF30 nat is a versatile plastic compound with a biobased content of over 95 % and 30 % wood fibre reinforcement. This material offers exceptional stiffness and high strength making it ideal for a wide range of applications, especially in the technical sector. Thanks to its good flowability the material can be easily processed by injection moulding.
M·BIOBASE® PLA 035 WF30 nat also impresses with its attractive wood look which makes for attractive design solutions. It is suitable for technical components as well as for consumer goods. The combination of environmental friendliness and performance makes it an excellent choice for sustainable product design.
Product properties
MFR (190°C/2.16 kg)
3.5 g/10 min
Stiffness
6,600 MPa
Charpy notched
3 kJ/m²
Image dimensions not found
Change image or reupload it
We would be happy to make you an offer!
Indicative technical data M·BIOBASE® PLA 035 WF30 nat
English | M·BIOBASE® PLA 035 WF30 nat | Unit | Standard |
|---|---|---|---|
Food contact approval: | no | - | EU 10/2011 |
Biobased content | >95 | % | |
Filler | 30 % wood fibre | % | |
Appearance: | brownish, fibres visible | - | - |
MFR (190 ˚C/2.16 kg): | 3.5 | g/10 min | ISO 1133 |
Density: | 1.29 | g/cm³ | ISO 1183 |
Tensile modulus: | 6,600 | MPa | ISO 527-1/-2 |
Tensile stength at break: | 60 | MPa | ISO 527-1/-2 |
Elongation at break: | 1.4 | % | ISO 527-1/-2 |
Charpy notched impact strength (+23 °C): | 3 | kJ/m² | ISO 179-1/1eA |
Charpy unnotched impact strength (+23 °C): | 10 | kJ/m² | ISO 179-1/1eU |
HDT/B | 50-145 | °C | ISO 75/B |
Please refer to the product data sheet for details.
Not the right material?
If you need an alternative compound with different material properties, you will find all our materials suitable for injection moulding here:
Image dimensions not found
Change image or reupload it
Processing instructions
Details on processing, handling and storage as well as processing temperatures and measured values can be found here:
Possible applications
Technical components
Coffee capsules
Cutlery
Plant clips
Clips
Packaging
Your application
Disclaimer: The information is based on our current knowledge and experience. A legally binding guarantee of certain properties or suitability for a specific individual case cannot be derived from this information. The information provided here does not release processors and users from carrying out their own tests and investigations in specific individual cases. BIO-FED®, M∙VERA®, M·BIOBASE®, M·CYCLOSE®, AF-Eco®, AF-CirColor®, AF-Carbon® and AF-CirComplex® are registered trademarks of AKRO-PLASTIC GmbH.
Further information
Not found what you are looking for? Take a look here!
Any further questions?
Not sure which compound is the right one?
