Menu Languages: EN/DE/FR/ES/IT

Últimas noticias


Noticias y eventos de BIO-FED

M·VERA® GP1012 and GP1045 successfully tested

Processing bioplastics in hot runners

In the 9/2022 issue of the magazine Kunststoffe international you can find out how we, together with Günther Heißkanaltechnik GmbH, have managed to reliably process supposedly sensitive bioplastics in the hot runner moulds through various trials. Our M·VERA® biocompounds GP1012 and GP1045 were successfully tested here.

Find the article here.

Enfoque hacia productos sostenibles

BIO-FED en K 2022

BIO-FED es una compañía experta en el desarrollo y la producción de plásticos biodegradables y/o biobasados, así como de compuestos PP equilibrados con biomasa, todo ello bajo la marca M·VERA®. En la K 2022 de Düsseldorf, la empresa presentará su gama de productos junto con AKRO-PLASTIC GmbH, AF-COLOR y K.D. Feddersen Ueberseegesellschaft mbH en un stand conjunto en el nuevo recinto del pabellón 6, C52.

El objetivo de la empresa con sede en Colonia es ofrecer soluciones para reducir la huella de carbono y los residuos con productos biodegradables y biobasados. Esto también incluye bioplásticos con cargas orgánicas sostenibles, como celulosa, lignina o almidón. Los compuestos de PP M·VERA® equilibrados con biomasa, certificados según REDcert2 e ISCC PLUS, así como los masterbatches correspondientes AF-CirColor®, AF-CirCarbon® y AF-CirComplex® también contribuyen de forma importante a ello.

La mayoría de los bioplásticos M·VERA® son compuestos biodegradables, muchos de los cuales también son parcialmente o totalmente biobasados. Son adecuados para diversas tecnologías de procesamiento, como el soplado de films, el moldeo por inyección, la extrusión y el termoformado. La gama también incluye un grado para acolchado agrícola que está certificado como degradable en el suelo según la norma EN 17033. También se ofrecen masterbatches sostenibles de color, negro y aditivos AF-Eco® adecuados para todos los compuestos biodegradables.

Moldeo por inyección

La cartera de productos de moldeo por inyección BIO-FED incluye productos que cubren una amplia gama de propiedades mecánicas y, por lo tanto, se pueden utilizar para una amplia gama de aplicaciones.

  • Productos con diferentes rigideces de hasta 8300 MPa
  • Compuestos resistentes con una resistencia a impactos de hasta 65 kj/m2
  • Compuestos elásticos con valores de elongación del 30-300 %
  • Resistencia a la tracción de hasta 70 MPa
  • HDT (B) hasta casi 100 C

"Además, BIO-FED ofrece productos con tiempos de procesamiento cortos que están certificados según OK compost HOME u OK biodegradable SOIL. Estos compuestos para moldeo por inyección tienen tiempos de ciclo similares a los de las poliolefinas comerciales como PP o PE, sin necesidad de máquinas o moldes especiales. También se pueden procesar en moldes con tecnologías convencionales como coladas en caliente y en frío con el mismo rendimiento y eficiencia que los plásticos estándar", explica el Dr. Stanislaw Haftka, director de ventas de BIO-FED. "Nuestros materiales High HDT también se pueden utilizar en aplicaciones con una alta resistencia al calor, por ejemplo, para cápsulas de café, cubiertos reutilizables, vajilla apta para lavavajillas, etc., sin necesidad de templar el producto final", añade Haftka.

Vajilla biodegradable y de base biológica: una posible aplicación de los biocompuestos M·VERA®
©WENPHOTO/stock.adobe.com

Extrusión y termoformado

Para la extrusión y el termoformado, se ofrecen productos con certificación OK compost INDUSTRIAL con diferentes proporciones de contenido renovable. Tienen diferentes propiedades mecánicas que se personalizan individualmente para la aplicación específica. Además, se pueden procesar con equipos estándar. Los productos se pueden procesar en láminas, films, perfiles o similares.

Awakening and change

Feddersen Group launches new corporate design for K show

The companies of the Feddersen Group have introduced a new corporate design as of 1 October 2022, just in time for the industry event K 2022.

Why a new corporate design? "The world is in a state of transition. On the one hand, climate change concerns politicians and individuals more than ever, because it is becoming more and more noticeable and affects us all. Thus, society is developing a new awareness of how to deal with environmentally harmful gases and substances to protect the planet and continue to preserve it for future generations. Structural changes are becoming more and more visible, and digitalisation offers new opportunities in many different areas of work and life. In 1949, the year the group was founded, Karl Detlef Feddersen faced the challenges of his time. In 2022, the company group faces new questions. We are introducing this new departure with the new corporate design," explains Sandra Dierks, Head of Communications & Public Relations at K.D. Feddersen Holding GmbH.

Our new logo

"Already in the first logo of K.D. Feddersen you can find the rhombus, which has been used again and again in different representations in the decades since the company was founded. Now these elements can be found in a dynamic form in the new logo. This symbol has accompanied our group of companies for decades and a part of it is now placed in front of the respective company name. We are well prepared for the change and want to move forward together with customers and principles on a future-oriented, digital path," adds Sandra Dierks.

The owner of the companies in the Feddersen Group is K.D. Feddersen Holding GmbH. The sole shareholder of K.D. Feddersen Holding GmbH is the non-profit K.D. Feddersen Foundation, which operates a residential and nursing home in Hamburg. The companies of the Feddersen Group cover a wide range of competencies in various sectors. K.D. Feddersen GmbH & Co. KG and its European subsidiaries as well as the sister companies in China and Southeast Asia specialise in the worldwide trade and distribution of engineering plastics. K.D. Feddersen Ueberseegesellschaft mbH and its subsidiaries in Latin America and South East Asia distribute technical products, chemicals as well as raw materials in various industries. AKRO-PLASTIC GmbH has been part of the Feddersen Group for over 30 years and is a specialist for innovative and application-oriented plastic compounds. AF-COLOR, operating under its own name since 2003, specialises in the production of black, color and additive masterbatches. BIO-FED develops and markets biodegradable and bio-based plastic compounds.

The toll compounding experts at PolyComp GmbH have been part of the Feddersen Group since 2013. Based in Norderstedt near Hamburg, they specialise in contract manufacturing and the production under license of engineering plastics. Since 2018, M.TEC ENGINEERING GmbH, an engineering service provider for the design of products and processes, has been part of the Feddersen Group. The focus of FEDDEM GmbH & Co. KG is on mechanical engineering and the manufacture of twin-screw extruders, compounding lines and turnkey systems. The Feddersen Group is completed by Voß Edelstahlhandel GmbH & Co. KG. The stainless steel trading company, founded in 1979, specialises in the supply of stainless steel, aluminium and yellow metals. However, this company operates independently on the market and is therefore not affected by the change in corporate design.

 

Find further info at New Logo (bio-fed.com)

Distribution of Bioplastics

BIO-FED and Piramidal sign distribution agreement for Brazil

The Cologne-based company BIO-FED and the Brazilian distributor Piramidal signed a distribution agreement for the Brazilian market in April 2022.

Bioplastics on their way to the Brazilian market

BIO-FED is a branch of AKRO-PLASTIC GmbH, member of the Feddersen Group and an expert in developing and producing biodegradable and/or biobased compounds under the brand name M·VERA®. This grade range consists of biodegradable compounds, most of them are also partially to fully biobased. Matching sustainable color, black and additive masterbatches with the brand name AF-Eco® can also be provided.

The portfolio was expanded with ISCC PLUS and REDcert² sustainable-certified compounds made from biomass-balanced PP. For these product lines M·VERA® PPH and M·VERA® PPC, there are specific AF-CirColor®, AF-CirCarbon® and AF-CirComplex® masterbatches based on biomass-balanced carrier material.

"We see Brazil as an emerging market for sustainable plastic products and want to gain a presence in this market with the help of our new distribution partner”, says Dr. Stanislaw Haftka, Sales Director at BIO-FED. "With Piramidal, we have a competent and experienced partner at our side in this region who has a strong network in various industries in Brazil", Haftka continues.

Piramidal is one of the Brazilian leaders in the thermoplastics distribution market. Offering a complete portfolio of resins with focus on excellence and innovation, Piramidal is a solution provider for the Brazilian plastic value chain. The Circular Solutions business unit launched in 2021, has a wide range of sustainable products and services that combine the preservation of the environment and economic growth.

“The partnership with BIO-FED is an important step in our strategy to bring complete sustainable solutions to the market. Bioplastics have huge growth potential in the coming years, and together we will be able to support our customers on this path.” says Fábio Koutchin, Circular Solutions Manager at Piramidal.

Piramidal will distribute the complete M·VERA® product range for blown film extrusion, injection moulding, extrusion and thermoforming applications in Brazil, as well as the matching masterbatches.

Distribution of bioplastics

BIO-FED and KBK sign distribution agreement for Japan

The Cologne-based company BIO-FED and the Japanese Kyokuto Boeki Kaisha, Ltd. (KBK), Tokyo, signed a distribution agreement for the Japanese market at the beginning of 2022.

BIO-FED, based in Cologne, is a branch of AKRO-PLASTIC GmbH and a member of the Feddersen Group. BIO-FED produces and distributes biodegradable and/or biobased plastic compounds under the brand name M·VERA® and had expanded its portfolio with ISCC PLUS and REDcert² sustainable certified M·VERA® compounds made from biomass-balanced polypropylene (PP).

"The bioplastics market in Japan has received a strong boost from the government's “Resource Circulation Strategy for Plastics” roadmap," says Dr. Stanislaw Haftka, Sales Director at BIO-FED. "With KBK, we have a competent and experienced partner at our side in this region who has a strong network in various industries in Japan," Haftka continues.

"By working with BIO-FED, KBK will be able to better meet the needs of the growing market every day, with an even stronger focus on sustainable products," says Tatsuya Okawa, General Manager, of Diversified & Innovative Materials Dept at KBK.

KBK will distribute the complete M·VERA® product range for blown film extrusion, injection moulding, extrusion and thermoforming applications in Japan, as well as the matching biodegradable or biobased masterbatches.

KBK is going to exhibit BIO-FED products at the Resource Circulation Expo, to be held in Tokyo from March 16th to 18th, booth E18-5.

KBK’s head office on the 7th floor of the Shin-Otemachi building in Tokyo

Bioplastics for France

BIO-FED exhibits for the first time at FIP 2022 in Lyon

The Cologne-based company BIO-FED, a branch of AKRO-PLASTIC GmbH and a company of the Feddersen Group, will be exhibiting from 5 to 8 April 2022 at the French plastics trade fair in Hall 6/5.1, Stand D 49. The booth will be a joint booth together with the companies K.D. Feddersen GmbH & Co. KG, Succursale France and FEDDEM GmbH & Co. KG which also belong to the Feddersen Group.

An application example for M·VERA® GP1045
©robertobinetti70/stock.adobe.com

BIO-FED is an expert in the developing and producing biodegradable and/or biobased compounds under the brand name M·VERA®. This grade range consists of biodegradable compounds, most of them are also partially to fully biobased. The French market is therefore particularly promising for the compounder. M·VERA® GP1025 which is predominantly biobased was developed based on biopolyester and for the injection moulding process. In addition to being approved for food contact (EU 10/2011), the grade is also OK compost INDUSTRIAL according to EN 13432. The special surface texture has a mineral appearance.

But BIO-FED also has the right material on offer for applications that only require medium stiffness: M∙VERA® GP1045. It was specially designed for injection moulding applications, consists of renewable raw materials and is home compostable. It is particularly suitable for applications requiring medium stiffness (tensile modulus 2,000 MPa) and can therefore be used for a wide range of household articles, toys, packaging, coffee capsules, etc. This compound consists of almost 100 % renewable raw materials and, according to the company, is ideally suited for the production of rigid objects.

"We see France as a very interesting and emerging market for bioplastics and we are sure that with our products we have the right answer to the current as well as to future bioplastics legislations," explains Dr. Stanislaw Haftka, Sales Director at BIO-FED. The M·VERA® portfolio was also recently expanded with ISCC PLUS and REDcert² sustainable-certified compounds made of biomass-balanced PP.

M·VERA® grades are suitable for many different processing technologies such as blown film, injection moulding, extrusion and thermoforming. Matching sustainable color, black and additive masterbatches can also be provided.

M·VERA® PPH y M·VERA® PPC

BIO-FED amplía su cartera con compuestos de polipropileno biobasados por balance de biomasa

La empresa con sede en Colonia BIO-FED, filial de AKRO-PLASTIC GmbH, ha ampliado su cartera con compuestos M·VERA® sostenibles certificados por ISCC PLUS y REDcert² fabricados con polipropileno biobasado por balance de biomasa (PP). Las fuentes de materias primas para el PP son los residuos de grasa y aceite vegetal que se producen en varios procesos, por ejemplo en la industria alimentaria.

ISCC PLUS y REDcert² son sistemas líderes de certificación de sostenibilidad para materiales de base biológica y reciclados en la industria química. La certificación garantiza la trazabilidad del flujo de materiales sostenibles a lo largo de toda la cadena de creación de valor.

Dado que el proceso de valor añadido de los productos en la industria química suele ser muy complejo, aquí se utiliza el enfoque del equilibrio o balance de masas. Los productos certificados se fabrican utilizando materias primas sostenibles (biomasa o reciclado de combustibles fósiles) para sustituir una cantidad equivalente de recursos fósiles en el proceso de producción.

Los nuevos productos son comercializados por BIO-FED con los nombres M·VERA® PPH y M·VERA® PPC. El cambio de la versión convencional de polipropileno a la versión sostenible es fácil para los procesadores, ya que el material se puede utilizar como solución de sustitución directa sin ajustar los parámetros del proceso en la producción. La alternativa de materiales con una huella de carbono reducida ofrece propiedades constantes y es adecuada para una amplia gama de aplicaciones. Van desde envases de pared fina moldeados por inyección y contenedores transparentes hasta films biorientados (films de BOPP) y sofisticadas aplicaciones de fibra (procesos de melt-blown). La alta resistencia del polipropileno balanceado con biomasa permite la producción de insertos no tejidos (non-woven) con filamentos extremadamente finos y resistentes a la rotura. Por ejemplo, las mascarillas FFP2 con inserciones no tejidas (non-woven) hechas de PP ahora se pueden producir utilizando este material sobre una base de materia prima sostenible.

Además de los compuestos M·VERA® PPH y M·VERA® PPC, BIO-FED ofrece masterbatches adecuados en colaboración con su empresa asociada AF-COLOR. Adecuados para la economía circular como campo de aplicación, estos nuevos masterbatches de color se denominan AF-CirColor® y AF-CirCarbon®. La cartera se complementa con los masterbatches de aditivos AF-CirComplex® correspondientes.

«Nos complace ofrecer a nuestros clientes una cartera cada vez más amplia, con productos que se pueden integrar fácilmente en sus procesos de producción existentes. Esto permite cambiar a materiales más respetuosos con el medio ambiente», afirma Stanislaw Haftka, director de ventas de BIO-FED.

ISCC PLUS and REDcert²

German Feddersen Group companies successfully certified

The Feddersen Group companies AKRO-PLASTIC GmbH and its branches AF-COLOR and BIO-FED as well as PolyComp GmbH have been certified for ISCC PLUS and REDcert². As part of the certification of AKRO-PLASTIC GmbH and its branches, the REDcert² certification was also extended to K.D. Feddersen GmbH & Co. KG. Corresponding certifications are in preparation for other companies in the group.

ISCC PLUS and REDcert² are sustainability certification systems for bio-based and recycled materials in the chemical industry (e.g. based on sugar cane, vegetable oil and fat waste or recycled material). "By using sustainable material flows, we are thus making a contribution to saving fossil resources or promoting the bio- and circular economy. At the same time, through the ISCC PLUS and REDcert² certifications, we are aligning ourselves further towards sustainability and offering our customers an even wider range of more environmentally friendly products," says Sandra Brück, specialist for life cycle assessment and sustainability at AKRO-PLASTIC, who accompanied this certification process.

The certification ensures the traceability of the sustainable material flow along the entire value chain. Since the value creation process of products in the chemical industry is often very complex, the mass balance approach is used for this purpose. Here, certified products are manufactured using sustainable resources to replace an equivalent amount of fossil resources in the production process.

BIO-FED at Fakuma 2021

Biocompounds for Flexible and Rigid Applications

The Cologne-based BIO-FED will also be exhibiting on the Feddersen group's joint Fakuma stand B2-2209 and focuses on its biocompound product range, which is suitable for flexible and rigid applications as well as for a wide range of manufacturing processes. Fakuma will take place this year from October 12 - 16.

Several injection moulding grades from the M·VERA® GP series are already certified according to OK compost HOME. These are almost 100 % biobased and are also suitable for food contact applications. In addition, there are numerous injection moulding materials that are certified according to OK compost INDUSTRIAL (according to EN 13432).

BIO-FED offers transparent and filled biocompounds for thermoforming and profile extrusion. Certification according to OK compost INDUSTRIAL is currently in preparation. Materials are also available for blow moulding applications and for monofilaments (e.g. 3D printing).

For film extrusion, the company offers biocompounds with OK compost HOME certification, for example for fruit and vegetable bags. Special soil-degradable grades for mulch films are also available. The corresponding SOIL certification according to EN 17033 by DIN CERTCO is also currently in preparation. A steady expansion of the portfolio with further biobased and biodegradable products in the sense of the circular economy and the Green Deal is in the works.

Together with AF-COLOR, also a branch of AKRO-PLASTIC GmbH, the company works on color and additive concentrates for numerous problem solutions in the field of circular economy. The products resulting from the cooperation make a significant contribution here.

Materiales biobasados y biodegradables M·VERA® para envases cosméticos, alimentarios y no alimentarios

Nuevos biocompuestos para extrusión y termoconformado

Bandejas termoconformadas para fresas: una posible aplicación para las calidades M·VERA® GP

El envase es la primera impresión que un cliente potencial recibe de un producto. Su apariencia a menudo determina la decisión de compra. Además de su faceta puramente visual, el envase también cumple funciones importantes, como la protección de los productos frente a la contaminación o a posibles daños. Sin embargo, muchos envases tienen un ciclo de vida corto y ya no se necesitan después de la compra. En consecuencia, la demanda de materiales sostenibles aumenta constantemente en este sector.

Con sus calidades M·VERA® GP4001, GP4003 y GP4005, la empresa con sede en Colonia BIO-FED ha desarrollado materiales para soluciones de envasado rígido que son fáciles de extruir. Las láminas extruidas pueden ser fácilmente termoconformadas gracias a sus espesores homogéneos, que permiten lograr unas prestaciones mecánicas comparables a plásticos tradicionales. Si es necesario, los biocompuestos de la gama de productos M·VERA® se pueden procesar en una estructura multicapa para mejorar sus propiedades mecánicas, ópticas o de barrera.

Las pruebas iniciales demuestran que la calidad M·VERA GP4001 es adecuada, por ejemplo, para cápsulas de café termoconformadas. Dado que el material está certificado por TÜV AUSTRIA Belgium hasta un grosor de pared de 1,1 mm de acuerdo con la norma OK compost INDUSTRIAL (EN 13432) y también está fabricado con aprox. un 70 % de materias primas renovables, puede contribuir a reducir la huella de CO2.

M∙VERA® GP1045

Adecuada para aplicaciones de rigidez media

Como filial de AKRO-PLASTIC GmbH, BIO-FED es el especialista en biocompuestos innovadores y orientados a las aplicaciones. La cartera de productos de compuestos biodegradables y/o biobasados bajo el nombre comercial M·VERA® se amplía constantemente con nuevos productos. Dependiendo del perfil de requisitos, estos compuestos son biodegradables en diversos entornos o adecuados para un uso a largo plazo, y se fabrican total o parcialmente con materias primas renovables.

BIO-FED suministra una amplia gama de compuestos M∙VERA® para el moldeo por inyección. Esta cartera ampliamente diversificada incluye altas cuotas de contenido renovable que oscilan entre el 50 y casi el 100 %. Están basados en PLA, PBAT o PHA y certificados de acuerdo con las normas establecidas por TÜV AUSTRIA Bélgica.

Tapones: una posible aplicación para M·VERA® GP1045

El nuevo M·VERA® GP1045 se ha diseñado especialmente para aplicaciones de moldeo por inyección. Se compone principalmente de recursos renovables y es Home Compost. Es especialmente adecuado para aplicaciones que requieren una rigidez media (módulo de tracción de 2000 MPa) y, por lo tanto, se puede utilizar para una amplia gama de artículos para el hogar, juguetes, envases, cápsulas de café, etc. «Este compuesto está hecho casi al 100 % de materias primas renovables de alta calidad y es idóneo para la producción de objetos rígidos», afirma Stanislaw Haftka, director de ventas de BIO-FED. También ha obtenido la aprobación de seguridad alimentaria para la UE. «Nuestros clientes demandan cada vez más productos que cumplan todas las propiedades mecánicas mencionadas anteriormente, y también se fijan en el origen de las materias primas y el final adecuado de su vida útil», añade Haftka. En su opinión, actualmente es difícil encontrar en el mercado un bioplástico con un perfil de propiedades tan completo.

Todos los compuestos se pueden procesar fácilmente en máquinas de inyección de termoplásticos comunes. BIO-FED se complace en apoyar a sus clientes desde las primeras pruebas y también ofrece sus servicios como socio colaborador para el desarrollo de nuevos productos. Además, el departamento de I+D de BIO-FED trabaja constantemente en nuevos biocompuestos para cumplir con los requisitos legales y las necesidades de los clientes.

Todos los materiales M·VERA® se pueden colorear de forma individualizada, por ejemplo con los masterbatches basados en biopolímeros AF-Eco® certificados según la norma EN 13432. La gama AF-Eco® se compone de masterbatches de color y negro de humo, así como masterbatches de aditivos.

Article about Biodegradable Plastics

Legislation and Climate Neutrality Increase Interest

The bioplastic industry is constantly striving to offer solutions for climate neutrality. New ideas, both in the field of biobased and biodegradable compounds, are constantly being developed. Read this German article about the efforts of the bioplastics sector – also our Sales Director Stan Haftka gives an insight here.

More interessting articels can be found on www.euwid-verpackung.de.

If you want to find out more about bioplastics, visit https://bio-fed.com/about-bioplastics/

 

Protección con conciencia ambiental clara

Guantes desechables de bioplásticos

En general, la seguridad y la higiene son aspectos muy importantes en la sociedad moderna y actualmente cada vez se plantean más exigencias en este sentido. Por ejemplo, nos hemos acostumbrado a llevar mascarilla al hacer compras, pero también son muchos los que desean protegerse las manos frente al contacto con cualquier virus. Los guantes desechables son una solución en este sentido, pero... ¿qué hacer con estos desechos? La empresa Plast-Farb Sp. Z.o.o. Sp. K., de la localidad polaca de Torun, ha reflexionado al respecto.

La empresa produce materiales de embalaje como sobres para envíos, bolsas y cintas de seguridad, tanto en calidad convencional como en diseño ecológico compostable.

Hasta la fecha, los guantes desechables no eran parte del portafolio del fabricante, pero la demanda global de equipos de protección para uso personal llevó a la empresa a la idea de hacer su aporte también en este ámbito. La maquinaria se complementó en poco tiempo con un equipo nuevo destinado a la producción de guantes desechables. Sin embargo, en lugar del polietileno que se usa comúnmente, la intención era emplear un material que fuera al mismo tiempo compostable con medios industriales, ya que la empresa era consciente de que cada vez más consumidores buscan alternativas a los productos de plástico convencionales.

Por eso se pusieron en contacto con BIO-FED, una empresa alemana con sede en Colonia. Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en compuestos innovadores y orientados a estas aplicaciones. Según el perfil de requisitos, sus compuestos son biodegradables en distintos entornos o bien sirven para un uso permanente y están fabricados total o parcialmente a partir de materias primas renovables. Stanislaw Haftka, director de ventas de BIO-FED, recomienda un tipo de material del portafolio M∙VERA® que no solo se puede compostar con medios industriales, sino que también ofrece la flexibilidad y resistencia necesarias para ser usado en aplicaciones como en la de los guantes desechables.

«Aunque la situación se vuelva a normalizar, detectamos numerosas posibilidades de aplicación para estos guantes en los segmentos más diversos del comercio minorista o en el ámbito del hogar y la jardinería», explica Agnieszka Kończal, especialista del departamento de ventas del segmento de bioenvases en Plast-Farb. «Esto nos permite combinar los requisitos de higiene y seguridad con la protección medioambiental y reducir así las emisiones de gases con efecto invernadero y el consumo de energía y recursos».

Distribution of Bioplastics

BIO-FED and Febo S.p.A. intensify cooperation

The cooperation between the Cologne-based company BIO-FED and Febo S.p.A., which was already started in 2016, will be further intensified in 2021. In addition to the exclusively for Italy and extension for Febo´s subsidiary Febo 3R, the distributor will now also receive exclusive distribution rights for the Greek market for Febo Hellas.

BIO-FED is a branch of AKRO-PLASTIC GmbH and a member of the Feddersen Group based in Hamburg, Germany. BIO-FED produces and sells biodegradable and/or biobased plastic compounds. Furthermore, BIO-FED has a state-of-the-art R&D department that is focused on innovation.

"The market for bioplastics has grown significantly in recent years, especially in southern European countries, due to the relevant legislation," says Dr Stanislaw Haftka, Sales Director at BIO-FED. "With Febo, we have a competent and experienced partner at our side in these regions who can take over our extensive customer base and provide individual on-site support," Haftka continues.

"By working with BIO-FED, Febo can better meet the needs of the growing market every day, focusing even more on sustainable products," says Febo S.p.A.'s Sales and Marketing Manager Cristiano Micheletti.

Febo will distribute the complete M·VERA® product range for blown film extrusion, injection moulding and extrusion applications in Italy and Greece, as well as the matching biodegradable AF-Eco® masterbatches. M·VERA® compounds for other processing technologies are currently under development. BIO-FED and Febo are optimistic that this cooperation will create new synergies and more opportunities in a market that is constantly evolving and growing.

Compuestos de PLA M·VERA®

La contribución de BIO-FED al Pacto Verde Europeo 2030

Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en biocompuestos innovadores orientados a las aplicaciones. La cartera bajo el nombre comercial M·VERA® se amplía continuamente con nuevos productos. La empresa está desarrollando y suministrando una amplia gama de compuestos sostenibles basados en PLA.

El Pacto Verde Europeo es un concepto presentado por la Comisión Europea en diciembre de 2019 con el objetivo de reducir a cero las emisiones netas de gases de efecto invernadero en la UE hasta el año 2050 para convertirse en el primer continente neutral desde el punto de vista climático. Ya en 2030 se debe haber conseguido una reducción de CO2 del 55 %. Con sus productos basados principalmente en PLA, sostenibles y sin contenido f´ósil, BIO-FED puede ofrecer un material alternativo, por ejemplo, para la mayoría de las aplicaciones de envasado. Los principales grados M·VERA® se pueden procesar tanto con moldeo por inyección como con extrusión, p. ej. para termoconformado.

El PLA es un polímero 100 % biobasado y compostable industrialmente, por lo que es muy versátil. Algunas de las aplicaciones posibles son, entre otras, los envases para alimentos y cosméticos, así como artículos de papelería o menaje. Los compuestos de PLA se caracterizan por su variada rigidez y su baja contracción. Las propiedades de los materiales se pueden ajustar individualmente añadiendo diferentes cargas o refuerzos y aditivos.

Ejemplo de aplicación de un envase cosmético ecológico

«Si en nuestra cartera falta el compuesto adecuado, tenemos la posibilidad de responder a los deseos y requisitos del cliente con nuestro experimentado equipo de investigación para desarrollar juntos compuestos individualizados basados en PLA», afirma Stanislaw Haftka, jefe de ventas de BIO-FED.

El fabricante indica que también es posible el desarrollo de compuestos transparentes. Además, se aspira a una biodegradabilidad conforme a «OK compost INDUSTRIAL». Por otro lado, con los masterbatches AF-Eco® biobasados de la filial AF-COLOR se pueden colorear los compuestos. Estos se diseñan y se fabrican en estrecha colaboración entre ambas empresas.

Injection Moulding Portfolio

Amplia gama de compuestos de moldeo por inyección biodegradables

Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en biocompuestos innovadores orientados a las aplicaciones. La cartera bajo el nombre comercial M·VERA® se amplía continuamente con nuevos productos. Según los requerimientos, estos compuestos son biodegradables en distintos entornos o bien sirven para un uso permanente y están fabricados total o parcialmente a partir de materias primas renovables.

Cubiertos desechables: una de las muchas aplicaciones de los tipos de M·VERA®

La cartera de compuestos de moldeo por inyección de BIO-FED está muy diversificada. Las cuotas de materias primas sostenibles oscilan entre el 50 % y prácticamente el 100 %. Por tanto, se renuncia en gran parte a las materias primas con base de petróleo. También hay disponibles grados con cargas de fibras vegetales. En función del producto, el campo de aplicación (envases/artículos desechables, pero también aplicaciones permanentes como artículos del hogar) o los deseos del cliente, se pueden suministrar compuestos con una compostabilidad para condiciones industriales, para el compost doméstico o compostables en suelo. Los productos cuentan con los certificados correspondientes de TÜV AUSTRIA Bélgica. «Teniendo en cuenta las leyes correspondientes, pero también la conciencia medioambiental cada vez mayor de los consumidores, estos atributos van a ser cada vez más importantes», afirma convencido Ulf Malcharczik, Business Development Manager. «Además, el mercado exige la posibilidad de procesar los materiales con equipamiento estándar y unas propiedades equiparables a las de un material estándar, además de una amplia variedad de colores y la idoneidad para el contacto con alimentos: pues bien, nuestros productos lo garantizan».

El nuevo M·VERA® GP1037 (con un módulo elástico tensil de aprox. 280 MPa y una elongación de rotura por encima del 300 %) se ha desarrollado especialmente para productos de moldeo por inyección flexibles y dúctiles. El compuesto está hecho de más de un 50 % de materias primas renovables, y se encuentra en preparación una certificación como «OK biodegradable SOIL» por parte de TÜV AUSTRIA Bélgica.

En función de las necesidades y los deseos del cliente, hay disponibles diversos materiales para las aplicaciones rígidas. M·VERA® GP1015 y M·VERA® GP1018 cuentan con la certificación «OK compost INDUSTRIAL» y abarcan un amplio rango de características mecánicas.

Cuando se desea una degradabilidad en el suelo o en el compost doméstico, M·VERA® GP1012 y M·VERA® GP1014 son la opción ideal. Estos compuestos están hechos de materias primas sostenibles prácticamente en un 100 %. Sus posibilidades de uso van desde envases hasta artículos del hogar, pasando por cubiertos desechables.

Todos los compuestos de la cartera de moldeo por inyección se pueden procesar sin problemas en cualquier máquina convencional. Para BIO-FED siempre es un placer ayudar a sus clientes desde los primeros ensayos y se ofrece como socio idóneo a la hora de desarrollar nuevos productos.

Bioplásticos con diversas opciones al final de su vida útil

El film ideal para cada mercado

Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en biocompuestos innovadores orientados a las aplicaciones. La cartera bajo el nombre comercial M·VERA® se amplía continuamente con nuevos productos. Según los requerimientos, estos compuestos son biodegradables en distintos entornos o bien sirven para un uso permanente y están fabricados total o parcialmente a partir de materias primas renovables.

Bolsa de fruta y verdura: una buena aplicación para M·VERA® B5033

«Además de la composición y de un procesamiento sencillo, los films también deben cumplir los requisitos mecánicos de la aplicación», explica Roland Andernach, director de producto en BIO-FED. Por ejemplo, en el caso de M·VERA® B5033 se ha conseguido mejorar considerablemente la resistencia a la tracción y el desgarro para su aplicación como bolsa de fruta y verdura. En este sentido, la empresa de Colonia no solo es capaz de desarrollar con su experimentado equipo de I+D un catálogo de materiales estándar, sino también soluciones individualizadas para cada cliente.

Almohadillas absorbentes de humedad

Materiales de envasado biodegradables en el expositor de productos frescos

Los alimentos frescos que hay en las estanterías de autoservicio, como la carne o el pescado, deben estar bien envasados para que puedan llegar a la mesa del consumidor limpios y sin gérmenes. Pomona Company Ltd. Sp.z o.o., una empresa de la localidad polaca de Żyrardów, se encarga con sus almohadillas absorbentes de humedad biodegradables PADECO® de que los líquidos queden recogidos en el envase y no lleguen a los alimentos frescos.

 

Pomona suministra al sector del procesamiento de alimentos multitud de almohadillas absorbentes para productos frescos como la fruta, la carne y el pescado. Al mismo tiempo, la empresa buscaba una alternativa ecológica a las almohadillas y envases convencionales que eliminara los plásticos y los productos químicos nocivos de los envases de alimentos frescos, es decir, una solución íntegramente orgánica y compostable. Por tanto, la empresa necesitaba un material compostable, reutilizable de forma ecológica y fácil de procesar en la producción. El absorbente está hecho de material no tejido de celulosa que va unido a la lámina compostable. Con un método de soplado, se fabrica una lámina que a continuación se aplica en la superficie del absorbente.

La empresa de Colonia BIO-FED solucionó el problema. Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en compuestos innovadores y orientados a las aplicaciones. Según el perfil de requisitos, sus compuestos son biodegradables en distintos entornos o bien sirven para un uso permanente y están fabricados total o parcialmente a partir de materias primas renovables. Para la lámina compostable aplicada sobre los absorbentes de PADECO®, se recomendó un tipo de lámina compostable del catálogo M·VERA® especialmente adecuada para esta aplicación en contacto con alimentos y certificada según la norma EN 13432 que además cuenta con el sello «OK compost INDUSTRIAL» de TÜV AUSTRIA Bélgica.

Foto 1: Las almohadillas absorbentes de humedad biodegradables PADECO® absorben los líquidos que segregan los alimentos frescos. Tienen la ventaja de que su proceso de reciclaje genera compost, a diferencia de las almohadillas convencionales, que se destruyen en el proceso de combustión. En consonancia con la filosofía de «cero residuos», las materias primas usadas para fabricar PADECO® se devuelven a su origen, la naturaleza.

M·VERA® GP1012

Compuestos home compost y biodegradables en suelo para moldeo por inyección

Como filial de AKRO-PLASTIC GmbH, BIO-FED está especializada en biocompuestos innovadores orientados a las aplicaciones. La cartera bajo el nombre comercial M·VERA® se amplía continuamente con nuevos productos. Según los requerimientos, estos compuestos son biodegradables en distintos entornos o bien sirven para un uso permanente y están fabricados total o parcialmente a partir de materias primas renovables.

 

Besides numerous grades for film extrusion, BIO-FED also offers compounds for injection moulding. The new M·VERA® GP1012 has been specially designed for this processing technique. It consists primarily of renewable resources and is certified as OK biodegradable SOIL and OK compost HOME by TÜV AUSTRIA Belgium for wall thicknesses up to 1 mm. It is particularly suitable for applications requiring high stiffness (tensile modulus 2,000 MPa) and can therefore be used for a wide range of household articles, toys, packaging, coffee capsules, etc. “This compound consists of almost 100% high-quality, renewable raw materials and is excellently suited for the production of rigid objects,” says Ulf Malcharczik, Business Development Manager at BIO-FED. According to the compounder, a food safety approval has also been granted.

“Our customers are increasingly demanding products that meet all the above-mentioned mechanical properties as well as the raw material origin and a corresponding end-of-life scenario,” Malcharczik adds. In his opinion, a bioplastic with a comparably comprehensive properties profile is currently difficult to find on the market.

BIO-FED at K 2019

Biodegradable and Biobased Compounds in Düsseldorf

BIO-FED produces and markets biodegradable and/or biobased plastic under the brand name M∙VERA®. The product portfolio comprises biocompounds with a share of renewable resources ranging from 30 to 100%.

In order to meet the legal requirements of the bioplastics sector in France and Italy, among other countries, BIO-FED offers compounds with a correspondingly high proportion of renewable raw materials (biobased carbon content over 50%) and variable end-of-life scenarios such as OK compost INDUSTRIAL, OK compost HOME and OK biodegradable SOIL. Possible application segments are:

- Biodegradable compounds for injection moulding applications (e.g. coffee capsules, drinking straws and disposable cutlery)

- Compounds for the production of home-compostable films for starch-based bag applications (e.g. fruit and vegetable bags)

- Compounds for the production of biodegradable films for agricultural applications (e.g. mulch films)

All M·VERA® compounds can be colored individually – for example with the AF-Eco® biopolymer based masterbatches which are certified by TÜV AUSTRIA Belgium in accordance with EN 13432. The AF-Eco® range consists of color and carbon black masterbatches as well as additive masterbatches.

“With our extensive, constantly expanding portfolio of innovative bioplastics compounds, we are making a contribution to waste avoidance by supplying alternatives to conventional plastics and thus also helping to reduce the carbon footprint,” says Dr. Stanislaw Haftka, Head of Sales at BIO-FED.

Come and visit us at our trade fair stand in Hall 6/B42.

Here you can find the whole news from AKRO-PLASTIC: https://akro-plastic.com/news/latest-news/k-2019/

Ecomondo 2018

BIO-FED expands again its offer on the Italian market

The Cologne-based company BIO-FED is exhibiting at Ecomondo 2018 in Rimini for the fourth time. The branch of AKRO-PLASTIC GmbH is specifically targeting its offer to the legislative framework on the European markets.

Italy is Europe’s leading country in the Green Economy Sector. They state an example regarding waste recycling, energy efficiency and productivity of resources. After the Italian government banned the use of non-biodegradable plastic bags in 2011, producers have been quite active in R&D.

In general, BIO-FED offers a wide range of biodegradable materials for film applications and can so provide solutions to the market. Since 2014 BIO-FED produces and markets biodegradable and/or biobased compounds under the M∙VERA® brand.

The BIO-FED product portfolio consists of a broad range of bioplastics compounds with different properties, such as biodegradability and/or high biobased content. The M·VERA® products are already well-established in a number of applications and can be used with various processing methods. In addition, all M·VERA® compounds can be colored individually – for example with the AF-Eco® biopolymer based masterbatches which are certified by TÜV AUSTRIA Belgium in accordance with EN 13432. The AF-Eco® range consists of color and carbon black masterbatches as well as additive masterbatches.

At Ecomondo 2018 BIO-FED will present its extended product portfolio that includes film extrusion materials with a variable biocontent. A large proportion of these compounds contain raw materials from renewable sources (biobased carbon content over 40 %) and meet the requirements for the relevant 'end-of-life' scenarios such as "OK compost INDUSTRIAL" and "OK compost HOME". All film materials are approved for food contact according to Regulation (EU) No 10/2011.The M∙VERA® portfolio offers biocompounds for traditional applications (shopping bags, garbage bags, etc.) as well as specialty products e. g. mulch film.

Furthermore, BIO-FED supplies a range of M∙VERA® injection moulding materials for applications such as coffee capsules. M·VERA® GP1012 has been awarded the "OK biodegradable SOIL" certificate as per ISO 17556 and EN 13432 by TÜV AUSTRIA Belgium. Engineering applications can be served by M∙VERA® ECS. Products for thermoforming applications are currently under development.

With its updated portfolio, BIO-FED can offer solutions for sustainable packaging that meet the requirements of the Italian regulations. BIO-FED is also presenting its products compliant with the French regulation (Décret no. 2016-379 of March 30th, 2016) which are about to be commercialised.

The Ecomondo fair takes place in Rimini on Nov 6-9, 2018. The BIO-FED stand no 72 can be found in Hall D3.

M·VERA® GP1012

BIO-FED Compound Certified as Biodegradable in Soil

The injection moulding material M·VERA® GP1012 by BIO-FED, a branch of AKRO-PLASTIC GmbH, has been tested by TÜV AUSTRIA Belgium and has been awarded the "OK biodegradable SOIL" certificate as per ISO 17556 and EN 13432.

 

This biocompound is suitable for processing in injection moulding and can be easily processed by all commercial machines. It consists of 100 % renewable materials, is heat resistant to over 100 °C and has an excellent balance of stiffness and toughness. This compound is suitable for use in agriculture and horticulture and can also be used for coffee capsules. Due to its light color, M·VERA® GP1012 can be colored with the AF-Eco® masterbatch from BIO-FED's sister branch AF-COLOR.

 

To qualify for the "OK biodegradable SOIL" TÜV certificate, at least 90 % of the material must degrade into carbon dioxide and water. The degradation is tested by accredited laboratories under controlled and standardised conditions over a period of no longer than two years.

All elements of the compounds meet the FDA requirements for use in products that come into contact with foodstuffs. The requirements for other certificates such as "OK compost HOME", as well as approval for products intended to come into contact with food as per EU 10/2011, are expected to be met in the first half of 2019.

 

Since 2014 BIO-FED produces and markets biodegradable and/or biobased compounds under the M∙VERA® brand. As a branch of AKRO-PLASTIC GmbH, a specialist for innovative customer-oriented plastic compounds, BIO-FED is part of the international Feddersen Group which has its head office in Hamburg.

The BIO-FED product portfolio consists a broad range of bioplastics compounds with different properties, such as biodegradability and/or high biobased content. The M·VERA® products are already well-established in a number of applications and can be used with various processing methods. In addition, all M·VERA® compounds can be colored individually – for example with the AF-Eco® biopolymerbased masterbatches which are certified in accordance with EN 13432. The AF-Eco® range consists of color and carbon black masterbatches as well as additive masterbatches.

In addition to materials for processing in the field of injection moulding, BIO-FED also manufactures biocompounds for use in extrusion, e.g. blown film that meets the strict legal requirements in France and Italy. A large proportion of these compounds are renewable materials (biobased carbon content over 40 %) and meet the requirements for the relevant 'end-of-life' scenarios such as "OK compost INDUSTRIAL" and "OK compost HOME".
 

BIO-FED will be at Fakuma 2018, at a shared stand with AKRO-PLASTIC and K.D. Feddersen in Hall B2, booth 2209, to present its biocompounds.

BIO-FED will also be at Ecomondo in Rimini from 6-9 November, 2018. At Plastex/MSV 2018 in Brno (Czech Rep.), BIO-FED will have representatives at the K.D. Feddersen CEE GmbH booth.

Meet us in Rimini

BIO-FED at Ecomondo 2017

This year BIO-FED will exhibit at Ecomondo fair for the third year. Here we will present our enlarged M·VERA® product portfolio which was specifically developed to meet the new upcoming laws in Italy, for example products with a high biobased content. In addition, products with a good transparency are included in our portfolio.

Ecomondo will take place in Rimini from November 7 – 10. BIO-FED and our distribution partner Febo S.p.A. team will be happy to meet you at our booth 72 in hall D3 in Rimini.

Come to Friedrichshafen and visit us from 17. – 21. October

BIO-FED at the 2017 Fakuma

BIO-FED, a branch of AKRO-PLASTIC GmbH, produces and markets biodegradable and/or biobased plastics under the brand name M∙VERA®. The company will be showcasing its broad portfolio of film extrusion and injection moulding grades at the 2017 Fakuma. Depending on the requirements profile, these compounds are either biodegradable in various environments or suitable for long-term use and are either completely or partially made from renewable raw materials. AF-Eco has been added to the product portfolio to include biopolymer-based color and additive masterbatches.

AKRO-PLASTIC and its branches AF-COLOR and BIO-FED can be visited at the 2017 Fakuma trade fair on their stand together with K.D. Feddersen GmbH & Co. KG in Hall B2, 2209. We are looking forward to your visit.

BIO-FED adds engineering plastics to portfolio

Biobased PA 6.10 compounds

BIO-FED specialises in marketing biodegradable and biobased plastics. Until now the Cologne-based company’s activities were centred primarily on products for film applications and individual products in the injection moulding sector, with a strong focus on the biodegradablity of the products. With the M∙VERA® ECS product line, this branch of AKRO-PLASTIC GmbH is now adding renewable resource‑based polyamide compounds to its portfolio.

Sustainability, biobased polymers and renewable resources – these are all important issues in the plastics industry today. In part driven by ongoing fluctuations in the price of oil, but also in an effort to reduce energy consumption and improve their carbon footprint, many polymer manufacturers are looking for solutions, along with the entire plastics-processing industry.

“PA 6.10 fulfils the standard definition of a bioplastic since it is made up of approximately 60 percent renewable resources”, says Roland Andernach, Product Manager at BIO-FED. Castor oil from the seeds of the castor oil plant (Ricinuns communis) forms the basis of sebacic acid, which in turn serves as the basis for the product’s renewable raw material content.

Unlike the previous products in the M∙VERA® line, the ECS products are partially biobased, but not biodegradable. Because a long service life of the end product is desirable in technical applications, and high material resistance is required, these products are ideal to round out the BIO-FED range.

Not to mention that the material’s carbon footprint is more favourable overall than that of polymers entirely of fossil origin. This is due to the fact that the plant-based raw materials have already removed CO from the environment during their growth phase. And since neither the seeds of the castor oil plant nor the castor oil extracted from them are used as food, there is no conflict with the food industry.

“M∙VERA® ECS claims its place in the market as a technical polymer, since it is characterised by greater resistance to highly aggressive media and hot water compared with PA 6/PA 6.6. PA 6.10, for example, absorbs approximately 50% less moisture than PA 6, exhibits greater dimensional stability, and has better cold impact resistance and an excellent surface finish”, explains Andernach.

From a technical standpoint, this material closes the gap between PA 6/PA 6.6 and PA 12. Yet the product’s working properties still correspond to those of a PA 6.

Masterbatch Portfolio Complemented

When it comes to biodegradable plastics, aesthetics matter as much as function. To meet market demand, AF-COLOR, a branch of AKRO-PLASTIC GmbH, has added new biodegradable masterbatch carriers to its AF-Eco product portfolio.

In bioplastics, pigmentation is an increasingly important aspect. Bioplastics today are pigmented almost exclusively using color masterbatches formulated with polymer carrier materials and the appropriate pigments. AF-Eco color masterbatches are based on biodegradable carrier polymers. The product line has been expanded to include abroad range of biodegradable masterbatch carriers. Now there‘s a carrier material that‘s just right for every application.

“We aim to rise to the challenge of growing complexity in biobased plastics applications, and this is how we plan to succeed. It will allow us to minimise interactions with other polymer components in a compound”, says Dirk Schöning, Sales Director at AF-COLOR.

“Now there are virtually no limits to our customers’ color requirements for biodegradable masterbatches”, notes Dr Inno Gaul, R & D Director at AF‑COLOR. According to the manufacturer, just about every color objective can be realised ‒ event pearlescent effect colors.

The biodegradable masterbatches are marketed exclusively by BIO-FED under the brand name AF-Eco. Like AF-COLOR, BIO-FED is a branch of AKRO-PLASTIC GmbH. BIO-FED specialises in marketing biobased and biodegradable plastics under the brand name M∙VERA®.

Interpack 2017 / BIO-FED apunta al mercado Francés

BIO-FED expone por primera vez en la Interpack de Dusseldorf 2017. La filial de AKRO-PLASTIC GmbH con sede en Colonia, está centrando sus esfuerzos en su oferta para cumplir con la nueva regulación del mercado Francés.

Una consecuencia de la nueva ley francesa es que a partir del 1.1.2017 se prohibieron las bolsas convencionales para frutas y verduras, y también su uso en sobres postales. Estos deben ser biobasados y biodegradables en compostaje doméstico. “Hemos expandido nuestro rango de productos para el mercado Francés incluyendo productos altamente innovadores y en linea con la actual legislación francesa para el mercado de film; presentaremos esto en Interpack", señala el Dr. Stanislaw Haftka, Director de Ventas en BIO-FED. Estos nuevos productos incluyen los grados de extrusión M·VERA® B5024 y B5025 parcialmente biobasados. Ambos productos pueden ser compostados a nivel doméstico y son muy transparentes, haciéndolos ideales para bolsas de frutas y verduras. La empresa con sede en Colonia presentará también en Interpack sus nuevos materiales biodegradables para inyección. El stand de BIO-FED puede encontrarse en el Hall 9/G05.

BIO-FED y Plastic Agents, S.L. firman un contrato de distribución para la península ibérica

BIO-FED, domiciliada en el BioCampus Cologne (en Colonia), es una filial de AKRO-PLASTIC GmbH y miembro del Grupo Feddersen con sede en Hamburgo. BIO-FED produce y distribuye compuestos de plástico compostables y biodegradables, y dispone de un departamento de investigación y desarrollo sumamente moderno orientado a las innovaciones.

Puesto que este mercado ha crecido claramente sobre todo en los países del sur de Europa debido a cambios en la legislación, esta empresa de Colonia decidió buscar un socio distribuidor también para España y Portugal, después de una exitosa negociación en Italia.

"Ahora hemos seguido intensificando la colaboración ya existente con el Sr. Barraca a través del contrato de distribución", afirma Stanislaw Haftka, jefe de ventas de BIO-FED. A través de esta colaboración que garantiza capacidad de almacenamiento local en España y, por tanto, un suministro rápido para los clientes en la península ibérica, BIO-FED espera poder atender allí con productos respetuosos con el medio ambiente especialmente al mercado creciente de films para mantillos destinados a la agricultura.

Key Account Manager for Bioplastics BIO-FED Begins Active Market Development in France

One consequence of the new energy turnaround law in France on 1.1.2017 was a ban on conventional plastic bags for fruit and vegetables as well as film packaging for mailing items. In future these have to be biobased and biodegradable in domestic compost. In order to be able to handle the growing demand for bioplastics in the French market and provide expert, on-site customer support, BIO-FED has decided to recruit a key account manager for this market.

The biodegradable and/or biobased plastic compounds specialist based at BioCampus Cologne/Germany has been able to gain the services of an experienced plastics expert to take over this role as of February 1, 2017. The new staff member has years of experience in the plastics industry, having worked for well-known polymer and compound manufacturers. He is also resident at the centre of the French film industry and has excellent contacts among processing companies. Working from his location he will establish and support the French market for the Cologne-based company. “We have expanded our portfolio for the French market to include several new and highly innovative products in line with current statutory provisions and specifically designed for the French film industry,” says Dr. Stanislaw Haftka, BIO-FED Sales Director. “We regard France as a very interesting and up-and-coming market for bioplastics, and we’re confident our products offer the right answer to the new bioplastics legislation in France.”

BIO-FED en K 2016

Tras el exitoso estreno ferial el año pasado en Fakuma, BIO-FED también estará presente por primera vez en la feria K de Düsseldorf. BIO-FED es una filial de AKRO-PLASTIC GmbH que pertenece al Grupo Feddersen, con operaciones internacionales y sede central en Hamburgo. BIO-FED fabrica y comercializa plásticos biodegradables y/o biobasados bajo la marca M·VERA®. En el estand conjunto del Grupo Feddersen en el pabellón 06, estand B42, BIO-FED presenta su gama de productos ante el público internacional. K 2016 se celebra en Düsseldorf del 19 al 26 de octubre de 2016.

BIO-FED and Febo Sign an Exclusivity Distribution Contract for Italy

BIO-FED is a branch of AKRO-PLASTIC GmbH and part of the Feddersen Group located in Hamburg, Germany. BIO-FED produces and sells compostable and biodegradable compounds and has a state of the art R&D center oriented to innovation.

Since this market has grown significantly especially in the southern European countries because of legislative changes, the Cologne-based company decided to sign an exclusivity contract with the company Febo S.p.A. “With Febo we acquired a strategic partner with a long history and knowledge of the plastics market in Italy” says Dr. Stanislaw Haftka, Sales Director at BIO-FED. “Thanks to BIO-FED, Febo can better support the needs of a growing market every day more focused on finding sustainable products”, says the CEO of Febo S.p.A., Carlo Monti. BIO-FED and Febo are positive that with this agreement new synergies will be created and more opportunities will be taken from a market that keeps evolving and growing.

 

BIO-FED amplía sus actividades de desarrollo de mercado en Italia

D. Alessandro Armiraglio ha colaborado con BIO-FED desde finales de 2015 como asesor de servicio técnico en Italia y el sur de Europa. Desde el 1 de febrero de 2016 también se ha convertido en asesor de desarrollo de mercado en la región. Ofrece asesoramiento a los clientes tanto para la selección de los productos como para su óptimo procesamiento en la máquina. El Sr. Armiraglio atesora muchos años de experiencia en este segmento. Por otra parte, nuestro colega italiano D. Andrea Colombo se ocupa del mercado italiano en calidad de gestor de cuentas clave para BIO-FED. Cuenta con la asistencia de Dña. Grazia Aruta desde la sede central de Colonia.

 

Asesor de BIO-FED para España y Portugal

D. Marcos Barraca Gutiérrez, de PLASTIC AGENTS, S.L., Valencia (España), lleva desde finales de 2015 trabajando como asesor de BIO-FED en España y Portugal. Distribuye en esta zona la gama de productos M·VERA® y la gama de masterbatches biodegradables AF-Eco, además de la cartera de masterbatches de AF-COLOR.